Call Us Today: 1-832-205-8800

4 DIY Driveway Ideas for an Entrance You’ll Love Cruising Into

Ready to give your driveway a makeover? We detail four DIY driveway projects you can tackle in a single weekend. —-

You might say that the driveway is the unsung hero of a home. Its functionality is undeniable — you drive in and out of this swath of material every day. It plays a major role in curb appeal, providing a wow-worthy first impression that sets the stage for arrival. And, perhaps best of all, a quality driveway can increase your home’s value.

Ready to give your driveway some TLC? You can upgrade your driveway with an easy DIY home improvement project in a single weekend (or even a single day!).

Options range from simple, affordable projects to more technical projects that require a large investment. We’ll detail four DIY driveway options so you can determine which project is best for your home and skill level.

So read on, roll up your sleeves, and get to work! Once you wrap the job, you’ll cruise into your beautiful new DIY driveway every day with pride.

Source: (Zachary Keimig / Unsplash)

Pressure-wash driveway restoration

Budget: $200 to $400

Project duration: 2 hours

Difficulty level: Easy

Project overview: 

This is the DIY driveway overhaul for a beginner on a budget. No, you won’t get an all-new driveway out of the effort — but you’ll get a sparkling new look in just a couple of hours for a few hundred dollars (or even less if you already have a pressure washer or opt to rent one instead of buying).

“I’ve worked in the pressure washing industry for a long time, and you’d be amazed at some of the driveway transformations I’ve seen,” explains California-based pressure washing expert Cory Paul.

“Pressure washing is an easy enough project for even the most inexperienced DIYers, and it’s certainly the cheapest, yet it can have an equally major impact on curb appeal as redoing the driveway from scratch.”

Instructions:

Clear everything off the driveway.
Sweep the surface with a broom or leaf blower.
Apply a cleaning solution (see recommendations below).
Pressure wash the surface at a pressure suitable for your driveway material.
Let the driveway dry and you’re good to go! Or finish with a sealer for an added layer of protection.

Worried you could damage your property as a newbie? Don’t be. “Many people ask if a pressure washer will cause any damage,” Paul says. “The answer is no in most cases because driveway materials are tough. But as a precaution, always keep the nozzle 6 to 12 inches from the surface.”

What you need to know:

This DIY project is the easiest, most affordable way to revamp a driveway.
Look for local pressure washer rentals to spend even less (or invest in the purchase, and use it every couple of years for a refresh).
You need decently high pressure (3,000 PSI) to clean most driveways.
Your cleaning solution has a significant impact on the final results. Use a product that’s made for the conditions you’re working with — such as oil stains or moss.

Get started with:

Zep Driveway, Masonry, and Concrete Cleaner and Degreaser, about $40 for a case of four at Amazon
Westinghouse Outdoor Power Equipment 3200 PSI Gas-Powered Pressure Washer, about $270 at Amazon
SWOPT Premium Rough Surface Deck Brush, about $33 at Amazon

Gravel driveway

Budget: $2,000 (about $2 per square foot)

Project duration: 10 hours

Difficulty level: Intermediate

Project overview: 

A gravel driveway is a feasible DIY project for home improvers with intermediate skill level. The materials are inexpensive, plus you can tailor the look to suit your home style. Also attractive for homeowners: Gravel driveways make for low-maintenance solutions.

Instructions:

Stake out the driveway’s path, clearing away grass and dirt.
Measure the space you’ve created to calculate the cubic yardage of gravel you’ll need to fill it (so multiply the width by length by depth).
Buy and spread your gravel, compacting layers as you go. Michael Hayworth of Apex Concrete and Hauling suggests packing four to six inches on the base, following with one to two inches for the final layer of material.

“If you’re going to do a gravel driveway, the best practice is to grade out the land while keeping drainage in mind,” Hayworth says. “Try to work with the flow of the current landscape so the water is directed away from your house or building.”

What you need to know: 

This is an intermediate-level DIY project that you can complete in a weekend — or even in a single long day.
“Outline your driveway with either a string line or paint beforehand so you can stay within the desired dimensions,” Hayworth recommends.

Get started with:

Brown pea gravel, about $30 per 10 cubic feet at Lowe’s
Greenes brown wood landscape edging, about $6 per 1.25 feet at Lowe’s

Source: (Sergey Lapunin / Unsplash)

Paving stone driveway

Budget: $3,000 (about $30 per square foot)

Project duration: 1 to 2 days

Difficulty level: Intermediate-advanced

Project overview:

A paver driveway adds beauty and texture to your curb appeal. “Despite its clean, crisp look, it is relatively easy to install as long as you have the right tools, patience, and work ethic,” explains contractor Aaron Donovan of AD Services.

To get started, you’ll need a broom, string line and pegs, shovel, spirit level, tape measure, a wheelbarrow, mallet, and some screed rails. Now, gather your driveway materials: sub-base aggregate, sand, and, of course, the paving stones of your choice, whether natural stone, brick, or concrete.

Instructions:

“Before beginning to lay your slabs, measure out your area with string and pegs,” Donovan says.
Dig down about six inches and incorporate a slope where the land is flat to allow surface water to run off naturally.
Place your restraints — either curbs or edging stones.
Now it is time for your sub-base of at least four inches, well compacted.
Apply your layer of damp, sharp sand and smooth it to the finished level.
Lay your blocks, which should initially reach about a half-inch above the desired level before compacting.
Last, sweep sand into the joints and compact the surface using a plate compactor, available to rent or buy. “Make sure every joint is adequately filled,” Donovan says.

What you need to know: 

Paving stones make for durable, polished-looking driveways.
This project is for intermediate to advanced DIYers.
“Make sure you measure your driveway carefully and leave some room for wastage paving slabs,” Donovan says.

Get started with:

Pavestone concrete paver, $0.58 each at Home Depot
Pavestone paver sand, about $5 per .5 cubic feet at Home Depot
Jackson 6 cubic foot steel wheelbarrow, $109 at Home Depot

Concrete driveway

Budget: $7,000 ($65 to 70 per square foot)

Project duration: 1 to 2 days

Difficulty level: Advanced

Project overview:

It takes some know-how and a larger budget to install a DIY concrete driveway, but the results are well worth the effort. A brand new concrete driveway is highly durable and adds major value to your home — studies show that a new driveway can increase the value of a home by as much as 10%. This is an advanced-level project for DIYers with experience, patience, and the willingness to plan carefully. Hayworth advises DIYers to hire a local company for pouring.

“The best practice is to grade out the land for your subgrade,” Hayworth explains, noting that the finished driveway elevation should be four inches above the subgrade. “Keep drainage in mind, as well.” He also suggests that you grade the land a bit wider during this process as a way to give yourself room to work along the margins.

Instructions:

Outline your driveway with either a string line or paint beforehand so you can stay within the desired dimensions.
Install form boards (typically 1-by-4-inch pieces of wood) using your string line.
Use metal or wood stakes to secure them for when the concrete is poured. “These stakes will keep the pressure from displacing or knocking over the boards,” Hayworth explains.
Measure and calculate the amount of concrete you’ll need for your driveway and contract a local company to pour the final layer.
Broom this top layer and edge the sides as needed. (Edging concrete creates neat, rounded edges that help minimize chipping when dry and finish the look.)

What you need to know: 

This is an advanced project and a larger investment.
“Timing is everything,” Hayworth says. Unless you’re truly a concrete expert, he advises DIYers to consult with a contractor to determine when the concrete is set enough to begin the finishing process.
A well-constructed and well-maintained concrete driveway can last 30 years.

Get started with:

250-foot string line with reel, about $5 at Home Depot
Bon Tool concrete edger, about $15 at Home Depot
24-inch concrete broom, about $20 at Home Depot

Header Image Source: (Aditya Vyas / Unsplash)

–Shared with love by the Valmy Team– your Texas realtor team. We would love to earn your trust and partnership, www.TheValmyTeam.com. All content copyright by the original authors.

Share This